Detail Hydro Testing Porta Pump - Sparague 33K
Air Driven Hydraulic Pump
a simply pump for Hydro testing in mining and drilling pipe liners industri ,for several parts are: high pressure Pipe,Packer tool,Valve, wireline tools,pressure transducer,
Max Out put Pump 33500 PSI / 2309 bar
Max final Out from Hyd Hose 2000 PSI/ 1378 bar
Description of pump: strongest and long life
The Sprague Products pump develops high output pressure by applying the principle of differential areas. The pump has a large area air piston, air-driven at low pressures. This air piston drives a small area fluid piston that in turn pumps liquids at high pressures. The fluid output pressure is determined by the ratio between the area of the air driven piston, the area of the fluid driven piston, and the applied operating air pressure.
The area relationship of the air piston to the fluid piston is referred to as the pump ratio. A nominal ratio is indicated in the dash number which follows the pump model basic number. Actual ratio may differ from nominal ratio.
Example: S-216-J-10 pump has an approximate ratio of 10 to 1 or 10 psi liquid pressure for each 1 psi of operating air pressure. In operation, an S-216-J-10 pump using 100 psi of input air pressure will produce a maximum liquid output pressure of 1000 psi; 80 psi air will produce an output pressure of 800 psi air; 60 psi air . . . 600 psi output; and 40 psi air . . . 400 psi output. By regulating the incoming air supply at the pressure regulator, the liquid output pressure can be adjusted through the pump’s pressure range.
Tampilkan Lebih Banyak
